The steel wire rope deteriorates over time due to poor maintenance, mostly because these details were not paid attention to.
2026-11-12
Over time, the condition of the steel wire rope deteriorates gradually. Many people initially think that the quality is poor. In fact, in many cases, it is not the problem of the steel wire rope itself, but rather some details are overlooked during normal use and maintenance. As time goes by, wear, rust, and deformation occur, and the lifespan naturally shortens.
Firstly, the lubrication is insufficient. The steel wire rope repeatedly rubs against the pulley and drum. If there is a long-term lack of oil, the friction between the wire strands and the steel wires will increase, and the wear will also be faster. Lubrication is not only for rust prevention, but also to reduce friction during operation. Regularly applying special steel wire rope lubricant can help the oil penetrate into the wire strands. Applying a layer of lubricant on the surface and leaving the inside dry will result in a much poorer effect.
Secondly, improper storage. When the steel wire rope is not in use, if it is simply thrown on the ground or placed in a damp, rainy, or acidic/alkaline area, it is very likely to get damp and rust. Especially in the humid climate of the south, the rusting process is faster. For temporarily unused steel wire ropes, try to store them in a dry and ventilated place, with a layer of padding underneath, and avoid direct contact with the ground. For long-term storage, surface rust treatment should be done.
Thirdly, insufficient inspection. As the steel wire rope is used for a long time, there will be broken wires, wear, deformation, and a decrease in diameter. These changes may not be obvious at first, but when accumulated to a certain extent, they will affect the use. It is recommended to check regularly, with a focus on checking broken wires, loose wire strands, flattening, twisting, knotting, rusting, and the fixed position of the rope end. Address any problems as soon as possible; don't wait until they are very obvious before replacing.
Fourthly, poor usage habits. Overloading, slanting pulling, sudden starting and stopping will cause the steel wire rope to bear additional impacts. Pulling hard, dragging hard, dragging on the ground will also accelerate the wear of the outer steel wires. When passing through the pulley and drum, if the wheel groove is severely worn or the size does not match, the steel wire rope will deteriorate more quickly. These may seem like minor issues, but over time, they have a significant impact.


QQ
WeChat
Tel
180-1231-5333
Go top